Hotline: 49 (0) 7563 909020 - Opening hours: Mo.-Do. 08:00 – 17:00 und Freitags 08:00 bis 12:00

ARMATEC PUMPS

Can be used in all branches of industry with liquids of the highest viscosity

ARMATEC PUMPS

The individual pump series are produced in-house and can be designed and manufactured in different material specifications according to your application. ARMATEC – FTS is the flexible partner for problem solutions in all branches of industry in which liquids and products with the highest viscosity are conveyed.

HIGH-EFFICIENCY GEARED MOTORS

Since 01 January 2017, we have only supplied our pumps with the prescribed and highly efficient gear motors of efficiency class IE 3 (Premium Efficiency)!

OUR PUMPS AT A GLANCE

CAVITY FEEDING PUMPS

Liquid feeding pump ASP series

The ASP feeding pump is used for liquid feeding in biogas plants. In this process, the liquid phase is mixed with the substrate to be introduced in the area of the mixing tunnel and pumped together via a pipeline into the respective fermenter.

PROGRESSIVE CAVITY PUMPS
BIOGAS AND INDUSTRY

Eccentric screw pumps – N and NF series
Progressing cavity pumps from ARMATEC-FTS are high-quality products which are individually manufactured for a wide variety of applications. In order to be able to offer you the right pump, we work according to the principle:

“From the application to the product”

This means, among other things, that the material composition of the eccentric screw pump is designed according to the medium present. A variety of material combinations are available for the most diverse media.

PROGRESSIVE CAVITY PUMPS
AGRICULTURE

Progressive cavity pumps with power take-off drive
ARMATEC-FTS manufactures different versions of progressive cavity pumps with power take-off drive especially for the agricultural sector. We also supply these pumps to well-known manufacturers of drum trucks as original equipment manufacturers.

Eccentric screw pumps with PTO drive are designed for a speed of 540 rpm at a pressure of 6 bar. Depending on the design, a flow rate of up to 360 m³/h is possible when the pump is new.

BLOWER PUMPS

The blower pump is primarily used in stationary applications for the blockage-free delivery of highly viscous liquids with solids content; the bellows pumps are particularly suitable:

The particular advantages of this pump are its simple design and reliability.

SUBMERGED CENTRIFUGAL PUMPS

The ARMATEC-FTS submersible centrifugal pump is used for the problem-free pumping and processing of slurry as well as liquid, floating and floating manure.
The submersible cutter pump, designed as a long-shaft pump, can be delivered with a length of up to 5m.
The electric motor is located above the liquid level and outside the pit. The pump body is located in the medium and has its suction opening on the underside. This allows the containers to be emptied as far as possible.
A shredding device integrated into the suction opening shreds long-fibre components in the medium.

CENTRIFUGAL PUMPS

The ARMATEC-FTS centrifugal pump, ACP for short, is a dry-installed “INLINE” pump and is used for pumping liquids, especially liquid manure
A shredding device integrated into the suction opening shreds long-fibre constituents in the medium.
Depending on the design, the size of the suction port is DN 200 or DN 250, that of the discharge port DN 150 or DN 200. The pump is always supplied on a base frame

The electrically driven pump is available with 11 / 15 / 18.5 kW motors